學系成員

樂代義助理教授(與工程學院英語學士班合聘教師)

工作執掌

授課項目:

綠色人因工程

實驗設計

學歷

2019 國立台灣科技大學工業管理博士

2015 國立台灣科技大學工業管理碩士

2013 B.Eng., Industrial Engineering, Universitas Indonesia, Indonesia

2013 Undergraduate Exchange Program, Waseda University, Japan

經歷

2023.2-Present. 元智大學工程學院英語學士班助理教授

2019.5-2023.1. 菲律賓馬普阿大學工業工程與工程管理學院副教授

2019.12-2020.1 台灣科技大學研究學者

2018.5-2019.5 用戶參與和翻譯普通話-印度尼西亞

2016.8-2017.5 台灣科技大學助教

2011.12-2012.8 用戶參與和翻譯日語-印度尼西亞

研究專長

綠色人體工學與可持續製造

宏觀人體工程學和工作設計

消費者行為

人機交互

感性工程和戰略產品設計

減少災害風險中的人類行為

事故分析與預防

期刊論文

A. 期刊論文

1. A. K. Ong, Y. T. Prasetyo*, P. Kusonwattana, N. Yuduang, S. F. Persada, R. Nadlifatin, M. M. Cahigas, T. Chuenyindee, and K. Thana, “Factors affecting the intention to prepare for tsunami in Thailand,” Ocean & Coastal Management, vol. 233, p. 106464, 2023.

2. M. J. Gumasing*, Y. T. Prasetyo, A. K. Ong, S. F. Persada, and R. Nadlifatin, “Factors influencing the perceived usability of wearable chair exoskeleton with market segmentation: A structural equation modeling and K-means clustering approach,” International Journal of Industrial Ergonomics, vol. 93, p. 103401, 2023.

3. B. Azis, A. K. Ong*, Y. T. Prasetyo, S. F. Persada, M. N. Young, Y. K. Sari, and R. Nadlifatin, “IOT human needs inside Compact House,” Journal of Open Innovation: Technology, Market, and Complexity, vol. 9, no. 1, pp. 1–9, 2023

4. Y. B. Kurata, A. K. Ong, Y. T. Prasetyo*, R. M. Dizon, S. F. Persada, and R. Nadlifatin, “Determining factors affecting perceived effectiveness among Filipinos for fire prevention preparedness in the National Capital Region, Philippines: Integrating Protection Motivation Theory and extended theory of planned behavior,” International Journal of Disaster Risk Reduction, vol. 85, p. 103497, 2023.

5. A. K. Ong, Y. T. Prasetyo*, R. T. Kishimoto, K. A. Mariñas, K. P. Robas, R. Nadlifatin, S. F. Persada, P. Kusonwattana, and N. Yuduang, “Determining factors affecting customer satisfaction of the National Electric Power Company (Meralco) during the COVID-19 pandemic in the Phillippines,” Utilities Policy, vol. 80, p. 101454, 2023.

6. A. K. Ong, Y. T. Prasetyo*, A.-K. F. Borja, F. A. Hosillos, Y. F. Perez, K. P. Robas, S. F. Persada, and R. Nadlifatin, “Factors affecting revisiting behavior to Taal Volcano during the Post Recovery 2020 Eruption: An extended theory of planned behavior approach,” International Journal of Disaster Risk Reduction, vol. 86, p. 103552, 2023.

7. S. F. Persada, Y. T. Prasetyo*, I. G. Maharani, B. Apriyansyah, A. K. Ong, M. N. Young, R. Nadlifatin, E. A. Setiyati, M. Shanti, R. D. Kumalasari, S. Ubud, R. A. Putra, H. H. Putri, G. A. Gunawan, I. B. Wijaya, A. Zunaidah, G. S. Putri, Y. Prisca, A. A. Redi, and M. Razif, “How tourists reacted to ecotourism during COVID-19: Insights on its sustainability from a multivariate analysis based on the case of banyuwangi,” Sustainability, vol. 15, no. 2, p. 1440, 2023.

8. M. J. Gumasing, Y. T. Prasetyo*, M. M. Cardoso, J. S. Freitas, R. Nadlifatin, and T. Chuenyindee, “Determining the ergonomic risk factors affecting the musculoskeletal disorders of Traffic Enforcers in Manila City, Philippines,” Work, pp. 1–12, 2023

9. A. K. Ong, Y. T. Prasetyo*, A. Estefanio, A. S. Tan, J. C. Videña, R. A. Villanueva, T. Chuenyindee, K. Thana, S. F. Persada, and R. Nadlifatin, “Determining factors affecting passenger satisfaction of ‘jeepney’ in the Philippine urban areas: The role of service quality in Sustainable Urban Transportation System,” Sustainability, vol. 15, no. 2, p. 1223, 2023.

10. M. M. Cahigas, Y. T. Prasetyo*, S. F. Persada, and R. Nadlifatin, “Examining Filipinos’ intention to revisit Siargao after Super Typhoon Rai 2021 (Odette): An extension of the theory of planned behavior approach,” International Journal of Disaster Risk Reduction, vol. 84, p. 103455, 2023.

11. M. M. Cahigas, Y. T. Prasetyo*, S. F. Persada, and R. Nadlifatin, “Filipinos’ intention to participate in 2022 Leyte landslide response volunteer opportunities: The role of understanding the 2022 Leyte landslide, social capital, altruistic concern, and theory of planned behavior,” International Journal of Disaster Risk Reduction, vol. 84, p. 103485, 2023

12. A. K. Ong*, F. E. Zulvia, and Y. T. Prasetyo, “‘The big one’ earthquake preparedness assessment among younger Filipinos using a random forest classifier and an artificial neural network,” Sustainability, vol. 15, no. 1, p. 679, 2022.

13. Y.-T. Jou, C. S. Saflor, K. A. Mariñas, M. N. Young, Y. T. Prasetyo, and S. F. Persada, “Assessing service quality and customer satisfaction of electric utility provider’s online payment system during the COVID-19 pandemic: A structural modeling approach,” Electronics, vol. 11, no. 22, p. 3646, 2022.

14. Z. J. Belmonte, Y. T. Prasetyo*, A. K. Ong, T. Chuenyindee, N. Yuduang, P. Kusonwattana, R. Nadlifatin, S. F. Persada, and T. Buaphiban, “How important is the tuition fee during the covid-19 pandemic in a developing country? evaluation of filipinos’ preferences on public university attributes using conjoint analysis,” Heliyon, vol. 8, no. 11, 2022.

15. Y. B. Kurata, Y. T. Prasetyo*, A. K. Ong, M. M. Cahigas, K. P. Robas, R. Nadlifatin, S. F. Persada, T. Chuenyindee, and K. Thana, “Predicting factors influencing intention to donate for Super Typhoon Odette victims: A structural equation model forest classifier approach,” International Journal of Disaster Risk Reduction, vol. 81, p. 103287, 2022.

16. P. Kusonwattana, Y. T. Prasetyo*, S. Vincent, J. Christofelix, A. Amudra, H. J. Montgomery, M. N. Young, R. Nadlifatin, and S. F. Persada, “Determining factors affecting behavioral intention to organize an online event during the COVID-19 pandemic,” Sustainability, vol. 14, no. 20, p. 12964, 2022.

17. M. J. Gumasing*, Y. T. Prasetyo, A. K. Ong, R. Nadlifatin, and S. F. Persada, “Determining factors affecting the perceived preparedness of super typhoon: Three broad domains of Ergonomics Approach,” Sustainability, vol. 14, no. 19, p. 12202, 2022.

18. A. K. Ong, Y. T. Prasetyo, G. M. Bagon, C. H. Dadulo, N. O. Hortillosa, M. A. Mercado, T. Chuenyindee, R. Nadlifatin, and S. F. Persada, “Investigating factors affecting behavioral intention among gym-goers to visit fitness centers during the COVID-19 pandemic: Integrating physical activity maintenance theory and social cognitive theory,” Sustainability, vol. 14, no. 19, p. 12020, 2022.

19. A. K. S. Ong, Y. T. Prasetyo*, K. E. Velasco, E. D. Abad, A. L. Buencille, E. M. Estorninos, M. M. L. Cahigas, T. Chuenyindee, S. F. Persada, R. Nadlifatin, and T. Sittiwatethanasiri, “Utilization of random forest classifier and artificial neural network for predicting the acceptance of reopening decommissioned nuclear power plant,” Annals of Nuclear Energy, vol. 175, p. 109188, 2022.

20. J. D. German, A. A. Redi, A. K. Ong, Y. T. Prasetyo, and V. L. Sumera, “Predicting factors affecting preparedness of volcanic eruption for a sustainable community: A case study in the Philippines,” Sustainability, vol. 14, no. 18, p. 11329, 2022.

21. A. K. Ong, Y. T. Prasetyo*, R. A. Roque, J. G. Garbo, K. P. Robas, S. F. Persada, and R. Nadlifatin, “Determining the factors affecting a career shifter’s use of software testing tools amidst the COVID-19 crisis in the Philippines: TTF-Tam Approach,” Sustainability, vol. 14, no. 17, p. 11084, 2022.

22. Y. T. Prasetyo*, M. M. Garcia, R. S. Dewi, T. Chuenyindee, Y. B. Kurata, and M. Widia, “Accident patterns and prevention measures for occupational injuries in the Philippine Food and Beverage Manufacturing Industry,” Work, vol. 73, no. 4, pp. 1307–1324, 2022.

23. M. J. Gumasing, Y. T. Prasetyo*, J. Jaurigue, D. N. Saavedra, R. Nadlifatin, T. Chuenyindee, and S. F. Persada, “The effects of biomechanical risk factors on musculoskeletal disorders among baggers in the supermarket industry,” Work, pp. 1–10, 2022.

24. M. M. Cahigas, Y. T. Prasetyo*, J. Alexander, P. L. Sutapa, S. Wiratama, V. Arvin, R. Nadlifatin, and S. F. Persada, “Factors affecting visiting behavior to Bali during the covid-19 pandemic: An extended theory of planned behavior approach,” Sustainability, vol. 14, no. 16, p. 10424, 2022.

25. Y.-T. Jou, K. A. Mariñas, C. S. Saflor, M. N. Young, Y. T. Prasetyo, and S. F. Persada, “Factors affecting perceived effectiveness of government response towards covid-19 vaccination in Occidental Mindoro, Philippines,” Healthcare, vol. 10, no. 8, p. 1483, 2022.

26. A. A. Abella, Y. T. Prasetyo*, M. N. Young, R. Nadlifatin, S. F. Persada, A. A. N. Perwira Redi, and T. Chuenyindee, “The effect of positive reinforcement of behavioral-based safety on safety participation in Philippine coal-fired power plant workers: A partial least square structural equation modeling (PLS-SEM) approach,” International Journal of Occupational Safety and Ergonomics, pp. 1–27, 2022.

27. N. Yuduang, A. K. S. Ong, Y. T. Prasetyo*, T. Chuenyindee, P. Kusonwattana, W. Limpasart, T. Sittiwatethanasiri, M. J. Gumasing, J. D. German, and R. Nadlifatin, “Factors influencing the perceived effectiveness of COVID-19 risk assessment mobile application ‘Morchana’ in Thailand: UTAUT2 approach,” International Journal of Environmental Research and Public Health, vol. 19, no. 9, p. 5643, 2022.

28. A. K. Ong, Y. T. Prasetyo*, N. Yuduang, R. Nadlifatin, S. F. Persada, K. P. Robas, T. Chuenyindee, and T. Buaphiban, “Utilization of random forest classifier and artificial neural network for predicting factors influencing the perceived usability of COVID-19 contact tracing ‘Morchana’ in Thailand,” International Journal of Environmental Research and Public Health, vol. 19, no. 13, p. 7979, 2022.

29. Y. B. Kurata, Y. T. Prasetyo*, A. K. S. Ong, R. Nadlifatin, S. F. Persada, T. Chuenyindee, and M. M. L. Cahigas, “Determining factors affecting preparedness beliefs among Filipinos on Taal Volcano eruption in Luzon, Philippines,” International Journal of Disaster Risk Reduction, vol. 76, p. 103035, 2022.

30. A. K. S. Ong, Y. T. Prasetyo*, T. Chuenyindee, M. N. Young, B. T. Doma, D. G. Caballes, R. S. Centeno, A. S. Morfe, and C. S. Bautista, “Preference analysis on the online learning attributes among senior high school students during the COVID-19 pandemic: A conjoint analysis approach,” Evaluation and Program Planning, p. 102100, 2022.

31. N. Yuduang, A. K. S. Ong, N. B. Vista, Y. T. Prasetyo*, R. Nadlifatin, S. F. Persada, M. J. Gumasing, J. D. German, K. P. Robas, T. Chuenyindee, and T. Buaphiban, “Utilizing structural equation modeling–artificial neural network hybrid approach in determining factors affecting perceived usability of mobile mental health application in the Philippines,” International Journal of Environmental Research and Public Health, vol. 19, no. 11, p. 6732, 2022.

32. N. Yuduang, A. K. S. Ong, Y. T. Prasetyo*, T. Chuenyindee, P. Kusonwattana, W. Limpasart, T. Sittiwatethanasiri, M. J. Gumasing, J. D. German, and R. Nadlifatin, “Factors influencing the perceived effectiveness of COVID-19 risk assessment mobile application ‘Morchana’ in Thailand: UTAUT2 approach,” International Journal of Environmental Research and Public Health, vol. 19, no. 9, p. 5643, 2022.

33. M. J. J. Gumasing, Y. T. Prasetyo*, A. K. Ong, S. F. Persada, and R. Nadlifatin, “Analyzing the service quality of E-Trike Operations: A new sustainable transportation infrastructure in Metro Manila, Philippines,” Infrastructures, vol. 7, no. 5, p. 69, 2022.

34. A. K. Ong, Y. T. Prasetyo*, P. Kusonwattana, K. A. Mariñas, N. Yuduang, T. Chuenyindee, K. P. Robas, S. F. Persada, and R. Nadlifatin, “Determining factors affecting the perceived usability of air pollution detection mobile application ‘Airvisual’ in Thailand: A structural equation model forest classifier approach,” Heliyon, vol. 8, no. 12, 2022.

35. M. J. Gumasing, Y. T. Prasetyo*, A. K. S. Ong, M. R. Carcellar, J. B. Aliado, R. Nadlifatin, and S. F. Persada, “Ergonomic design of apron bus with consideration for passengers with mobility constraints,” Safety, vol. 8, no. 2, p. 33, 2022.

36. J. D. German, A. A. N. P. Redi, Y. T. Prasetyo, S. F. Persada, A. K. S. Ong, M. N. Young, and R. Nadlifatin, “Choosing a package carrier during COVID-19 pandemic: An integration of pro-environmental planned behavior (PEPB) theory and Service Quality (SERVQUAL),” Journal of Cleaner Production, vol. 346, p. 131123, 2022.

37. T. Chuenyindee, A. K. S. Ong, Y. T. Prasetyo*, S. F. Persada, R. Nadlifatin, and T. Sittiwatethanasiri, “Factors affecting the perceived usability of the COVID-19 contact-tracing application ‘Thai chana’ during the early COVID-19 omicron period,” International Journal of Environmental Research and Public Health, vol. 19, no. 7, p. 4383, 2022.

38. A. A. Santosa, Y. T. Prasetyo*, F. Alamsjah, A. A. N. P. Redi, I. Gunawan, A. R. Putra, S. F. Persada, and R. Nadlifatin, “How the COVID-19 pandemic affected the sustainable adoption of digital signature: An integrated factors analysis model,” Sustainability, vol. 14, no. 7, p. 4281, 2022.

39. T. Chuenyindee, A. K. S. Ong, J. P. Ramos, Y. T. Prasetyo*, R. Nadlifatin, Y. B. Kurata, and T. Sittiwatethanasiri, “Public Utility Vehicle Service Quality and customer satisfaction in the Philippines during the COVID-19 pandemic,” Utilities Policy, vol. 75, p. 101336, 2022.

40. A. K. S. Ong, Y. T. Prasetyo*, J. N. Pinugu, T. Chuenyindee, J. Chin, and R. Nadlifatin, “Determining factors influencing students’ future intentions to enroll in chemistry-related courses: Integrating self-determination theory and theory of planned behavior,” International Journal of Science Education, pp. 1–23, 2022.

41. A. K. Ong, Y. T. Prasetyo*, J. M. Salazar, J. J. Erfe, A. A. Abella, M. N. Young, T. Chuenyindee, R. Nadlifatin, and A. A. Ngurah Perwira Redi, “Investigating the acceptance of the reopening Bataan Nuclear Power Plant: Integrating Protection Motivation Theory and extended theory of planned behavior,” Nuclear Engineering and Technology, vol. 54, no. 3, pp. 1115–1125, 2022.

42. M. J. Gumasing, Y. T. Prasetyo*, A. K. S. Ong, and R. Nadlifatin, “Determination of factors affecting the response efficacy of Filipinos under Typhoon Conson 2021 (jolina): An extended protection motivation theory approach,” International Journal of Disaster Risk Reduction, vol. 70, p. 102759, 2022.

43. A. K. Ong, Y. T. Prasetyo, K. N. Tayao, K. A. Mariñas, I. D. Ayuwati, R. Nadlifatin, and S. F. Persada, “Socio-economic factors affecting member’s satisfaction towards National Health Insurance: An evidence from the Philippines,” International Journal of Environmental Research and Public Health, vol. 19, no. 22, p. 15395, 2022.

44. P. Kusonwattana, A. K. Ong, Y. T. Prasetyo, K. A. Mariñas, N. Yuduang, T. Chuenyindee, K. Thana, S. F. Persada, R. Nadlifatin, and K. P. Robas, “Predicting factors affecting the intention to prepare for mitigation of man-made fire disasters in Chonburi Province, Thailand: An integration of structural equation modeling and artificial neural network hybrid approach,” Sustainability, vol. 14, no. 22, p. 15442, 2022.

45. A. K. Ong, Y. T. Prasetyo*, L. A. De Leon, I. D. Ayuwati, R. Nadlifatin, and S. F. Persada, “Plantitas/Plantitos preference analysis on succulents attributes and its market segmentation: Integrating conjoint analysis and K-means clustering for gardening marketing strategy,” Sustainability, vol. 14, no. 24, p. 16718, 2022.

46. T. Chuenyindee, L. D. Montenegro, A. K. Ong, Y. T. Prasetyo*, R. Nadlifatin, I. D. Ayuwati, T. Sittiwatethanasiri, and K. P. Robas, “The perceived usability of the learning management system during the COVID-19 pandemic: Integrating System Usability Scale, technology acceptance model, and task-technology fit,” Work, pp. 1–18, 2022.

47. Y. B. Kurata, Y. T. Prasetyo*, A. K. S. Ong, R. Nadlifatin, and T. Chuenyindee, “Factors affecting perceived effectiveness of typhoon vamco (Ulysses) flood disaster response among Filipinos in Luzon, Philippines: An integration of protection motivation theory and extended theory of planned behavior,” International Journal of Disaster Risk Reduction, vol. 67, p. 102670, 2022.

48. A. K. Ong, Y. T. Prasetyo*, F. C. Lagura, R. N. Ramos, J. M. Salazar, K. M. Sigua, J. A. Villas, T. Chuenyindee, R. Nadlifatin, S. F. Persada, and K. Thana, “Young Adult Preference Analysis on the attributes of COVID-19 vaccine in the Philippines: A conjoint analysis approach,” Public Health in Practice, vol. 4, p. 100300, 2022.

49. A. K. Ong, A. R. Pequeña, Y. T. Prasetyo*, T. Chuenyindee, T. Buaphiban, S. F. Persada, and R. Nadlifatin, “The evaluation of the local beer industry during the COVID-19 pandemic and its relationship with open innovation,” Journal of Open Innovation: Technology, Market, and Complexity, vol. 8, no. 3, p. 127, 2022.

50. T. Chuenyindee, R. B. Torres, Y. T. Prasetyo*, R. Nadlifatin, and S. F. Persada, “Determining factors affecting perceived quality among shoe manufacturing workers towards shoe quality: A structural equation modeling approach,” Journal of Open Innovation: Technology, Market, and Complexity, vol. 8, no. 2, p. 82, 2022.

51. A. K. S. Ong, Y. T. Prasetyo*, M. K. Paruli, T. M. Alejandro, A. S. Parais, and L. M. Sarne, “Factors affecting students’ happiness on online learning during the COVID-19 pandemic: A self determination theory approach,” International Journal of Information and Education Technology, vol. 12, no. 6, pp. 555–564, 2022.

52. M. J. Gumasing, Y. T. Prasetyo*, S. F. Persada, A. K. Ong, M. N. Young, R. Nadlifatin, and A. A. Redi, “Using online grocery applications during the COVID-19 pandemic: Their relationship with open innovation,” Journal of Open Innovation: Technology, Market, and Complexity, vol. 8, no. 2, p. 93, 2022.

53. R. Nadlifatin, S. F. Persada, J. H. Munthe, B. Ardiansyahmiraja, A. A. Redi, Y. T. Prasetyo, and P. F. Belgiawan, “Understanding factors influencing traveler’s adoption of travel influencer advertising: An information adoption model approach,” Business: Theory and Practice, vol. 23, no. 1, pp. 131–140, 2022.

54. A. K. Ong, Y. T. Prasetyo*, B. E. Vallespin, S. F. Persada, and R. Nadlifatin, “Evaluating the influence of service quality, hedonic, and utilitarian value on Shopper's behavioral intentions in urban shopping malls during the COVID-19 pandemic,” Heliyon, vol. 8, no. 12, 2022.

55. M. M. Cahigas, Y. T. Prasetyo*, S. F. Persada, A. K. Ong, and R. Nadlifatin, “Understanding the perceived behavior of public utility bus passengers during the era of covid-19 pandemic in the Philippines: Application of social exchange theory and theory of planned behavior,” Research in Transportation Business & Management, vol. 45, p. 100840, 2022.

56. A. K. Ong, Y. T. Prasetyo*, K. A. Mariñas, J. P. Perez, S. F. Persada, R. Nadlifatin, T. Chuenyindee, and T. Buaphiban, “Factors affecting customer satisfaction in fast food restaurant ‘jollibee’ during the covid-19 pandemic,” Sustainability, vol. 14, no. 22, p. 15477, 2022.

57. S. F. Persada, Y. T. Prasetyo*, X. V. Suryananda, B. Apriyansyah, A. K. Ong, R. Nadlifatin, E. A. Setiyati, R. A. Putra, A. Purnomo, B. Triangga, N. J. Siregar, D. Carolina, F. I. Maulana, and B. Ardiansyahmiraja, “How the education industries react to synchronous and asynchronous learning in COVID-19: Multigroup Analysis Insights for future online education,” Sustainability, vol. 14, no. 22, p. 15288, 2022.

58. M. N. Young, T. J. T. Chuahay, Y.-H. Lee, J. F. Diaz, Y. T. Prasetyo, S. F. Persada, and R. Nadilfatin, “Portfolio optimization considering behavioral stocks with return scenario generation,” Mathematics, vol. 10, no. 22, p. 4269, 2022.

59. Y. T. Prasetyo*, L. D. Montenegro, R. Nadlifatin, Y. B. Kurata, A. K. Ong, and T. Chuenyindee, “The influence of organizational commitment on the perceived effectiveness of virtual meetings by Filipino professionals during the COVID-19 pandemic: A structural equation modeling approach,” Work, pp. 1–11, 2021.

60. A. K. S. Ong, Y. T. Prasetyo*, F. C. Lagura, R. N. Ramos, K. M. Sigua, J. A. Villas, M. N. Young, J. F. Diaz, S. F. Persada, and A. A. Ngurah Perwira Redi, “Factors affecting intention to prepare for mitigation of ‘the big one’ earthquake in the Philippines: Integrating protection motivation theory and extended theory of planned behavior,” International Journal of Disaster Risk Reduction, p. 102467, 2021.

61. A. K. S. Ong, Y. T. Prasetyo*, M. N. Young, J. F. Diaz, T. Chuenyindee, P. Kusonwattana, N. Yuduang, R. Nadlifatin, and A. A. Redi, “Students’ preference analysis on online learning attributes in industrial engineering education during the covid-19 pandemic: A conjoint analysis approach for sustainable industrial engineers,” Sustainability, vol. 13, no. 15, p. 8339, 2021.

62. A. K. S. Ong, Y. T. Prasetyo*, K. L. Picazo, K. A. Salvador, B. A. Miraja, Y. B. Kurata, T. Chuenyindee, R. Nadlifatin, A. A. Redi, and M. N. Young, “Gym-goers preference analysis of fitness centers during the covid-19 pandemic: A conjoint analysis approach for business sustainability,” Sustainability, vol. 13, no. 18, p. 10481, 2021.

63. M. M. Navarro, Y. T. Prasetyo*, M. N. Young, R. Nadlifatin, and A. A. Redi, “The perceived satisfaction in utilizing learning management system among engineering students during the COVID-19 pandemic: Integrating Task Technology Fit and extended technology acceptance model,” Sustainability, vol. 13, no. 19, p. 10669, 2021.

64. M. Reinaldi, A. A. Redi, D. F. Prakoso, A. W. Widodo, M. R. Wibisono, A. Supranartha, R. I. Liperda, R. Nadlifatin, Y. T. Prasetyo, and S. Sakti, “Solving the two Echelon vehicle routing problem using simulated annealing Algorithm Considering drop Box facilities and Emission cost: A case study of reverse logistics application in Indonesia,” Algorithms, vol. 14, no. 9, p. 259, 2021.

65. Y. T. Prasetyo*, H. Tanto, M. Mariyanto, C. Hanjaya, M. N. Young, S. F. Persada, B. A. Miraja, and A. A. Redi, “Factors Affecting Customer Satisfaction and Loyalty in Online Food Delivery Service during the COVID-19 Pandemic: Its Relation with Open Innovation,” Journal of Open Innovation: Technology, Market, and Complexity, vol. 7, no. 1, p. 76, 2021.

66. J. R. Balinado, Y. T. Prasetyo*, M. N. Young, S. F. Persada, B. A. Miraja, and A. A. Perwira Redi, “The Effect of Service Quality on Customer Satisfaction in an Automotive After-Sales Service,” Journal of Open Innovation: Technology, Market, and Complexity, vol. 7, no. 2, p. 116, 2021.

67. A. K. S. Ong, M. A. Cleofas, Y. T. Prasetyo*, T. Chuenyindee, M. N. Young, J. F. Diaz, R. Nadlifatin, and A. A. Redi, “Consumer behavior in clothing industry and its relationship with open innovation dynamics during the COVID-19 pandemic,” Journal of Open Innovation: Technology, Market, and Complexity, vol. 7, no. 4, p. 211, 2021.

68. R. T. Kishimoto, Y. T. Prasetyo*, S. F. Persada, and A. A. Redi, “Filipino Generation Z on Mobile Legends during COVID-19: A Determination of Playtime and Satisfaction,” International Journal of Information and Education Technology, vol. 11, no. 8, pp. 381–386, 2021.

69. James Ryan Fernandez, Yogi Tri Prasetyo*, Satria Fadil Persada, and A. A. N. Perwira Redi, "Automation of Predictive Maintenance Using Internet of Things (IoT) Technology at University-Based O&M Project," International Journal of Information and Education Technology vol. 11, no. 7, pp. 332-336, 2021.

70. Y. T. Prasetyo*, Y. B. Kurata, A. R. Acosta, A. P. Aben, S. F. Persada, R. Nadlifatin, and A. A. Redi, “Factors affecting response actions of the 2020 Taal Volcano eruption among Filipinos in Luzon, Philippines: A structural equation modeling approach,” International Journal of Disaster Risk Reduction, p. 102454, 2021.

71. Satria Fadil Persada, Irfandy Dalimunte, Reny Nadlifatin, Bobby Ardiansyah Miraja, Anak Agung Ngurah Perwira Redi, Yogi Tri Prasetyo, Jacky Chin, and Shu-Chiang Lin, “Revealing the Behavior Intention of Tech-Savvy Generation Z to Use Electronic Wallet Usage: A Theory of Planned Behavior Based Measurement,” International Journal of Business and Society, vol. 22, no. 1, pp. 213–226, 2021.

72. B. Ardiansyahmiraja, R. Nadlifatin, S. F. Persada, Y. T. Prasetyo, and A. P. Redi, “Learning from a distance during a pandemic outbreak: Factors affecting students’ acceptance of distance learning during school closures due to COVID-19”, Je-LKS, vol. 17, no. 2, pp. 21-31, Nov. 2021.

73. Y. T. Prasetyo*, A. K. Ong, G. K. Concepcion, F. M. Navata, R. A. Robles, I. J. Tomagos, M. N. Young, J. F. Diaz, R. Nadlifatin, and A. A. Redi, “Determining factors Affecting acceptance of E-learning platforms during the COVID-19 pandemic: Integrating Extended Technology Acceptance Model and DeLone & Mclean is success model,” Sustainability, vol. 13, no. 15, p. 8365, 2021.

74. Y. T. Prasetyo*, R. S. Dewi, N. M. Balatbat, M. L. Antonio, T. Chuenyindee, A. A. Perwira Redi, M. N. Young, J. F. Diaz, and Y. B. Kurata, “The evaluation of preference and perceived quality of health Communication Icons associated with COVID-19 prevention measures,” Healthcare, vol. 9, no. 9, p. 1115, 2021.

75. Y. T. Prasetyo*, R. A. Roque, T. Chuenyindee, M. N. Young, J. F. Diaz, S. F. Persada, B. A. Miraja, and A. A. Perwira Redi, “Determining Factors Affecting the Acceptance of Medical Education eLearning Platforms during the COVID-19 Pandemic in the Philippines: UTAUT2 Approach,” Healthcare, vol. 9, no. 7, p. 780, 2021.

76. Y. T. Prasetyo*, A. M. Castillo, L. J. Salonga, J. A. Sia, T. Chuenyindee, M. N. Young, S. F. Persada, B. A. Miraja, and A. A. Redi, “Factors Influencing Repurchase Intention in Drive-Through Fast Food: A Structural Equation Modeling Approach,” Foods, vol. 10, no. 6, p. 1205, 2021.

77. Y. T. Prasetyo*, L. D. Montenegro, R. Nadlifatin, Y. B. Kurata, A. K. Ong, and T. Chuenyindee, “The influence of organizational commitment on the perceived effectiveness of virtual meetings by Filipino professionals during the COVID-19 pandemic: A structural equation modeling approach,” Work, pp. 1–11, 2021.

78. Y. T. Prasetyo*, T. Maulanti, S. F. Persada, A. A. Perwira Redi, M. N. Young, and J. F. Diaz, “Factors influencing job satisfaction among dentists during the new normal of the COVID-19 pandemic in Indonesia: A structural equation modeling approach,” Work, pp. 1–12, 2021.

79. A. K. S. Ong, Y. T. Prasetyo*, M. A. Libiran, Y. M. Lontoc, J. A. Lunaria, A. M. Manalo, B. A. Miraja, M. N. Young, T. Chuenyindee, S. F. Persada, and A. A. Perwira Redi, “Consumer Preference Analysis on Attributes of Milk Tea: A Conjoint Analysis Approach,” Foods, vol. 10, no. 6, p. 1382, 2021.

80. Y. T. Prasetyo*, A. M. Castillo, L. J. Salonga, J. A. Sia, and J. A. Seneta, “Factors affecting perceived effectiveness of COVID-19 prevention measures among Filipinos during Enhanced Community Quarantine in Luzon, Philippines: Integrating Protection Motivation Theory and extended Theory of Planned Behavior,” International Journal of Infectious Diseases, vol. 99, pp. 312–323, 2020.

81. Y. T. Prasetyo*, D. B. Senoro, J. D. German, R. A. C. Robielos, and F. P. Ney, “Confirmatory factor analysis of vulnerability to natural hazards: A household Vulnerability Assessment in Marinduque Island, Philippines,” International Journal of Disaster Risk Reduction, vol. 50, p. 101831, 2020.

82. Y. T. Prasetyo*, “Evaluating Southeast Asian Military Camouflage Designs Using Camouflage Similarity Index (CSI),” Malaysian Journal of Public Health Medicine, vol. 20, no. Special1, pp. 152–160, 2020.

83. B. A. Miraja, S. F. Persada, Y. T. Prasetyo, P. F. Belgiawan, and A. P. Redi, “Applying Protection Motivation Theory To Understand Generation Z Students Intention To Comply With Educational Software Anti Piracy Law,” International Journal of Emerging Technologies in Learning (iJET), vol. 14, no. 18, p. 39, 2019.

84. C. J. Lin, Y. T. Prasetyo, and R. Widyaningrum, “Eye movement measures for predicting eye gaze accuracy and symptoms in 2D and 3D displays,” Displays, vol. 60, pp. 1–8, 2019.

85. C. J. Lin, Y. T. Prasetyo, N. D. Siswanto, and B. C. Jiang, “Optimization of color design for military camouflage in CIELAB color space,” Color Research & Application, vol. 44, no. 3, pp. 367–380, 2019.

86. C. J. Lin and Y. T. Prasetyo, “A metaheuristic‐based approach to optimizing color design for military camouflage using particle swarm optimization,” Color Research & Application, vol. 44, no. 5, pp. 740–748, 2019.

87. C. Lin, Y. Prasetyo, and R. Widyaningrum, “Eye movement parameters for performance evaluation in projection-based stereoscopic display”, JEMR, vol. 11, no. 6, Nov. 2018.

會議論文

1. J. C. Chan, M. N. Young, Y. T. Prasetyo, and R. Nadlifatin, “Analysis of mean - variance theory and safety-first model for portfolio selection on non-fungible tokens (nfts) and collectibles,” 2022 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2022.

2. A. N. Tan, Y. T. Prasetyo, S. F. Persada, and R. Nadlifatin, “Conjoint analysis on the attributes affecting the customers’ preference of hotel accommodation,” Proceedings of the 8th International Conference on Industrial and Business Engineering, 2022.

3. J. F. Victoria, Y. T. Prasetyo, T. Chuenyindee, S. F. Persada, and R. Nadlifatin, “Building-up an aircraft reliability program: An application of failure modes and effects analysis (FMEA),” Proceedings of the 8th International Conference on Industrial and Business Engineering, 2022.

4. J. I. Villanueva, Y. T. Prasetyo, S. F. Persada, and R. Nadlifatin, “Using extended UTAUT2 model to determine factors influencing the purchase behavior of visual display terminal users for gaming purposes,” Proceedings of the 8th International Conference on Industrial and Business Engineering, 2022.

5. S. S. Evangelista, Y. T. Prasetyo, and S. F. Persada, “Prioritizing factors influencing courier services satisfaction in the Philippines: An entropy-based Fuzzy Topsis approach,” Proceedings of the 8th International Conference on Industrial and Business Engineering, 2022.

6. W. Wei, Y. T. Prasetyo, M. N. Young, S. S. Islam, A. A. Redi, and S. F. Persada, “The analysis of barriers to implement building information management in China's construction industry using AHP,” Proceedings of the 8th International Conference on Industrial and Business Engineering, 2022.

7. R. M. Masias, Y. T. Prasetyo, I. D. Ayuwati, and S. F. Persada, “Usability comparison of different N95 filtering facepiece respirators in cement warehouse/terminal application,” Proceedings of the 8th International Conference on Industrial and Business Engineering, 2022.

8. R. M. Paradina and Y. T. Prasetyo, “A physical ergonomics study on adaptation and discomfort of student’s e-learning in the Philippines during the COVID-19 pandemic,” Big Data Management and Analysis for Cyber Physical Systems, pp. 192–200, 2022.

9. A. K. Ong, Y. T. Prasetyo, Y. B. Kurata, and T. Chuenyindee, “Utilization of machine learning algorithm to determine factors affecting response to action among Filipinos toward the eruption of Taal Volcano,” Communications in Computer and Information Science, pp. 181–192, 2022.

10. Y. T. Prasetyo, M. A. Santiago, S. F. Persada, and T. Chuenyindee, “The utilization of Six sigma DMAIC methodology in the improvement of the quality and application of methyl methacrylate (mma)-based elastomeric membrane,” 2022 3rd International Conference on Internet and E-Business, 2022.

11. D. J. Praga, Y. T. Prasetyo, R. Nadlifatin, S. F. Persada, and T. Chuenyindee, “I.T. Professionals' preference for work from home setup: A conjoint analysis approach,” 2022 8th International Conference on e-Society, e-Learning and e-Technologies (ICSLT), 2022.

12. Y. T. Prasetyo*, D. G. Fuente, T. Chuenyindee, R. Nadlifatin, and S. F. Persada, “The impact of covid-19 pandemic on airport: An empirical study of service quality, customer satisfaction, and travel intention for Sustainable Airport Operations,” 2022 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2022

13. J. G. Armea, Y. T. Prasetyo, R. Nadlifatin, S. F. Persada, and T. Chuenyindee, “Influence of LPG retail branding on household customer preference in Luzon, the Philippines using conjoint analysis,” 2022 8th International Conference on E-business and Mobile Commerce, 2022.

14. M. Reinaldi, A. A. Redi, Y. T. Prasetyo, R. Nadlifatin, P. Jewpanya, and M. Asrol, “Analysis of Reverse Logistics Model considering two echelon distribution network and Drop Box Facilities,” 2022 8th International Conference on E-business and Mobile Commerce, 2022.

15. Y. T. Prasetyo, L. Regondola-Bolata, R. Nadlifatin, S. F. Persada, T. Chuenyindee, and B. Ardiansyahmiraja, “A classification scheme in evaluating undergraduate students’ feedback towards service quality of Private University,” 2022 4th International Conference on Management Science and Industrial Engineering (MSIE), 2022.

16. A. R. Santos, M. F. Maghfiroh, J. R. Sapiter, Y. T. Prasetyo, A. A. Redi, S. F. Persada, M. N. Young, R. Nadlifatin, and B. Ardiansyahmiraja, “A mixed integer linear programming for covid-19 related medical waste reverse logistics network design,” 2022 4th International Conference on Management Science and Industrial Engineering (MSIE), 2022.

17. J. R. Pineda, Y. T. Prasetyo, R. Nadlifatin, S. F. Persada, T. Chuenyindee, and I. D. Ayuwati, “Preference location of assignment engineering professionals in the Middle East: A conjoint analysis approach,” 2022 4th International Conference on Management Science and Industrial Engineering (MSIE), 2022.

18. A. A. N. Perwira Redi, G. Calica Altes, J. K. Coronel Chan, A. C. Acla, P. Jewpanya, A. A. Agung Redioka, Y. Tri Prasetyo, and M. N. Young, “Facility location problem to identify the optimal allocation of near-expired COVID-19 vaccines,” 2022 International Conference on Decision Aid Sciences and Applications (DASA), 2022.

19. J. P. Alegre Perez, Y. T. Prasetyo, M. I. Norona, M. N. Young, S. Fadil Persada, R. A. Robielos, and R. Nadlifatin, “Determinant factors for consumers’ intention in choosing a shopping center: An extended theory of planned behavior approach,” 2022 The 3rd International Conference on Industrial Engineering and Industrial Management, 2022.

20. Y. T. Prasetyo*, A. K. Ong, R. Nadlifatin, B. A. Ong, L. P. Adiguna, I. Asallie, H. Tanto, and K. Arden, “Determining factors affecting customer loyalty to internet service provider during the COVID-19 pandemic: A structural equation modeling approach,” 2022 Asia-Pacific Computer Technologies Conference (APCT), 2022.

21. R. Nadlifatin, S. F. Persada, M. Clarinda, G. A. Handiwibowo, R. R. Laksitowati, Y. T. Prasetyo, and A. A. Perwira Redi, “Social Media-based online entrepreneurship approach on millennials: A measurement of Job Pursuit intention on multi-level marketing,” Procedia Computer Science, vol. 197, pp. 110–117, 2022.

22. P. Prihananto, S. F. Persada, B. Apriyansyah, M. P. Naulia, Y. T. Prasetyo, and S.-C. Lin, “Customers purchase intention in Social Commerce: A descriptive study,” Proceedings of the 3rd International Conference on Business and Management of Technology (ICONBMT 2021), 2022.

23. Y. T. Prasetyo*, M. C. Sario, T. Chuenyindee, R. Nadlifatin, S. F. Persada, and T. Sittiwatethanasiri, “Analysis of non-fatal occupational accidents in a ready-mixed concrete company,” 2022 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2022

24. Y. T. Prasetyo*, A. K. Ong, A. M. Cagubcob, T. Chuenyindee, R. Nadlifatin, and S. F. Persada, “The impact of the COVID-19 pandemic on the organizational commitment in semiconductor industry: The mediator effect of the job satisfaction,” 2022 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2022

25. R. A. Rebualos, M. N. Young, Y. T. Prasetyo, and R. Nadlifatin, “Portfolio selection using mean-variance model for financial technology sector in the Australian market before and during COVID-19,” 2022 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2022

26. J. L. Aro, Y. T. Prasetyo, and S. F. Persada, “A novel approach of ranking of alternatives through functional mapping of criterion sub-intervals into a single interval (RAFSI) method under a Fermatean environment,” Proceedings of the 8th International Conference on Industrial and Business Engineering, 2022

27. G. C. Altes, M. N. Young, Y. T. Prasetyo, and R. Nadlifatin, “Mean-variance and safety-first portfolio selection utilizing historical returns of Forbes Asia’s fab50 companies,” 2022 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2022.

28. M. M. Navarro, M. N. Young, Y. T. Prasetyo, and R. Nadlifatin, “Customer load profile clustering using K-means algorithm: A case study in an electric distribution company in the Philippines amidst the COVID-19 pandemic,” 2022 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2022.

29. A. R. Santos, Y. T. Prasetyo, S. F. Persada, and R. Nadlifatin, “Filipinos’ preference on delivery of credible news information on Social Media: A conjoint analysis approach,” Proceedings of the 8th International Conference on Industrial and Business Engineering, 2022.

30. Y. T. Prasetyo and J. Khow, “Macroergonomics-Based Approach for a Management Trainee Program in the Utilities Industry,” Proceedings of the 21st Congress of the International Ergonomics Association (IEA 2021), pp. 820–826, 2021

31. A. Nadhirah, M. Widia, N. S. Fauzan, Yassierli, A. A. Rashid, H. A. Aziz, E. H. Sukadarin, H. Osman, Z. M. Jawi, E. N. Roslin, H. R. Zadry, Y. T. Prasetyo, and M. S. Neubert, “The association between Rear Impact Crash Characteristics and risk of injury,” Human-Centered Technology for a Better Tomorrow, pp. 351–360, 2021.

32. M. Widia, N. S. Fauzan, F. A. Aziz, Yassierli, A. A. Rashid, M. S. Neubert, H. A. Aziz, E. H. Sukadarin, H. Osman, Z. M. Jawi, E. N. Roslin, H. R. Zadry, and Y. T. Prasetyo, “Risk factors affecting the severity of single vehicle rear-end crash,” Advances in Human Aspects of Transportation, pp. 136–143, 2021.

33. P. Dominic I. Completado and Y. Tri Prasetyo, “Physical ergonomics analysis for use of NON- contact infrared Thermometer gun,” 2021 3rd International Conference on Management Science and Industrial Engineering, 2021.

34. A. A. N. P. Perwira Redi, I. Dwi Lasmana, N. Layli Rachmawati, Y. Tri Prasetyo, D. Budiono, and P. Jewpanya, “Solving container Stowage problem using particle swarm optimization algorithm with multiple social learning structures,” 2021 3rd International Conference on Management Science and Industrial Engineering, 2021.

35. Y. Tri Prasetyo, P. T. Tejero, A. Rose P. Paras, and M. Allyson Pear S. Garcia, “The impact of social media to addictive behavior and mental health issues: A structural equation modeling approach,” 2021 3rd International Conference on Management Science and Industrial Engineering, 2021.

36. Y. Tri Prasetyo, P. T. Tejero, A. Rose P. Paras, and M. Allyson Pear S. Garcia, “The impact of social media to addictive behavior and mental health issues: A structural equation modeling approach,” 2021 3rd International Conference on Management Science and Industrial Engineering, 2021.

37. M. M. Cahigas and Y. T. Prasetyo, “Matching-Based Comprehension of Emergency Safety Symbols Among Filipinos: User-Centered Quality Measure,” Proceedings of the 21st Congress of the International Ergonomics Association (IEA 2021), pp. 384–392, 2021.

38. Y. T. Prasetyo and R. L. Dones, “Musculoskeletal Symptoms and Postural Analysis of Lettuce Farmers,” Proceedings of the 21st Congress of the International Ergonomics Association (IEA 2021), pp. 241–249, 2021.

39. Y. T. Prasetyo and J. Khow, “Macroergonomics-Based Approach for a Management Trainee Program in the Utilities Industry,” Proceedings of the 21st Congress of the International Ergonomics Association (IEA 2021), pp. 820–826, 2021.

40. Y. T. Prasetyo and R. Widyaningrum, “Error Rate as Mediators of the Relationships Among 2D/3D TV Environment, Eye Gaze Accuracy, and Symptoms,” Proceedings of the 21st Congress of the International Ergonomics Association (IEA 2021), pp. 756–761, 2021.

41. Y. T. Prasetyo and M. A. Santiago, “Factors affecting the well-being of people working in known Smart Cities: Utaut2 approach,” 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2021.

42. Y. T. Prasetyo, A. M. Cagubcob, S. F. Persada, and A. A. N. P. Redi, “Application of 8D Methodology for Minimizing Test Mixing Event in Semiconductor Test Manufacturing,” 2021 IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA), 2021.

43. C. J. Roldan and Y. T. Prasetyo, “Evaluating The Effects of Aim Lab Training on Filipino Valorant Players' Shooting Accuracy,” 2021 IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA), 2021

44. Y. T. Prasetyo and K. O. Soliman, “Usability Evaluation of ERP Systems: A Comparison between SAP S/4 Hana & Oracle Cloud,” 2021 IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA), 2021.

45. R. M. Paradina and Y. T. Prasetyo, “Particle Scrap Reduction of an Automotive Camera Product By Lean Six Sigma DMAIC Approach,” 2021 IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA), 2021.

46. Y. T. Prasetyo, A. V. Bautista, S. F. Persada, and A. A. N. P. Redi, “Quality Improvement for the Packaging of Test to Tape machine Using the Statistical Process Control,” 2021 IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA), 2021

47. A. A. Gatdula and Y. T. Prasetyo, “Understanding the Influencing Factors and the Preference of Infant Milk Formula: A PLS-SEM Approach,” 2021 IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA), 2021.

48. Y. T. Prasetyo and B. E. Vallespin, “Determining Factors Affecting the Acceptance of Grab Application in the Philippines using UTAUT2 Approach,” 2021 IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA), 2021.

49. M. C. Sario and Y. T. Prasetyo, “Classification Scheme of Work-Related Accidents in a Ready-Mixed Concrete Company,” 2021 IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA), 2021.

50. M. F. Narvas and Y. T. Prasetyo, “Postural & Hand Ergonomics Assessments in Wiring High Voltage Control & Protection Panels,” 2021 IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA), 2021.

51. A. M. Agapito, Y. T. Prasetyo, S. F. Persada, and A. A. N. P. Redi, “Quality Assessment Support System for Alarm Prioritization in Pharmaceutical Plant Operations,” 2021 IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA), 2021.

52. Y. T. Prasetyo and L. Regondola-Bolata, “Evaluating undergraduate students' feedback towards service quality of private university: A structural equation modeling approach,” 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2021.

53. J. L. Abraham and Y. T. Prasetyo, “Macroergonomics-asedApproach in Job Satisfaction of Senior High School Teachers in a School in Mindoro Using Herzberg's Two-Factor Theory,” 2021 IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA), 2021.

54. Y. T. Prasetyo and R. Widyaningrum, “Eye-hand movement in 3D displays: A structural equation modeling approach,” IOP Conference Series: Materials Science and Engineering, vol. 1072, no. 1, p. 012059, 2021.

55. Y. T. Prasetyo, R. V. L. Cortes, F. S. Bautista, K. C. E. Piguing, A. J. A. Bermudez, and C. N. Monteiro, “Predicting Hand Grip Strength of Filipino Teenagers Aged 15–18 Using Stepwise Multiple Linear Regression,” Advances in Intelligent Systems and Computing Convergence of Ergonomics and Design, pp. 170–177, 2021.

56. Y. T. Prasetyo and R. Widyaningrum, “Eye Ballistic Phase Time and Eye Correction Phase Time as Mediators of the Relationships Among 2D/3D TV Environment, Eye Gaze Accuracy, and Symptoms,” Advances in Intelligent Systems and Computing Convergence of Ergonomics and Design, pp. 399–408, 2021.

57. J. Ian C. Villanueva and Y. Tri Prasetyo, “Analysis of factors influencing grip and comfort of side nippers’ usage in plastic model Kit building,” 2021 International Conference on Human-Machine Interaction, 2021.

58. J. A. Limcauco, Y. T. Prasetyo, and R. Nadlifatin, “Back propagation neural network with feature sensitivity analysis in railways: Short term prediction of passenger flow using time, environmental and operational factors,” The 2021 7th International Conference on Industrial and Business Engineering, 2021.

59. C. G. Perea, Y. T. Prasetyo, and R. Nadlifatin, “Rise of online cockfighting derby in the time of new normal for Gamecock players: A measure of stress in the midst of COVID-19 pandemic,” The 2021 7th International Conference on Industrial and Business Engineering, 2021.

60. T. Chuenyindee, Y. T. Prasetyo, and P. Srisuwan, “Cutting tool quality improvement: A case study of electronic parts manufacturer,” The 2021 7th International Conference on Industrial and Business Engineering, 2021.

61. A. R. Pequeña and Y. T. Prasetyo, “The effect of Mask & Face Shield on the general discomfort of the workers in the food industry: A structural equation modeling approach,” Journal of Physics: Conference Series, vol. 1996, no. 1, p. 012012, 2021.

62. M. Helda G. Canada, J. O. Jaurigue, K. Katriz Mae C. Antonio, J. B. Ilagan, and Y. Tri Prasetyo, “Assessment of fatigue through working environment and hazardous driving behavior among drivers,” 2021 3rd International Conference on Management Science and Industrial Engineering, 2021.

63. Y. T. Prasetyo, S. A. R. Tumanan, L. A. F. Yarte, M. C. C. Ogoy, and A. K. S. Ong, “Blackboard E-learning System Acceptance and Satisfaction Among Filipino High School Students: An Extended Technology Acceptance Model (TAM) Approach,” 2020 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2020.

64. R. B. Torres and Y. T. Prasetyo, “Evaluation of ergonomic working conditions among manual leather cutter in the Shoe Industry,” 2020 The 6th International Conference on Industrial and Business Engineering (ICIBE), 2020.

65. Y. T. Prasetyo and D. G. D. D. Fuente, “Determinant Factors Affecting Customer Satisfaction among Filipinos in Lazada Online Shopping during COVID-19 Pandemic: A Structural Equation Modeling Approach,” 2020 7th International Conference on Frontiers of Industrial Engineering (ICFIE), 2020.

66. Y. T. Prasetyo and D. D. Salazar, “Polishing Material Effectiveness for Vertical Crown Tip by Lean Six Sigma DMAIC Approach,” 2020 7th International Conference on Frontiers of Industrial Engineering (ICFIE), 2020.

67. Y. T. Prasetyo and K. K. M. Rosita, “Equipment Reliability Optimization using Predictive Reliability Centered Maintenance: A Case-Study Illustration and Comprehensive Literature Review,” 2020 7th International Conference on Frontiers of Industrial Engineering (ICFIE), 2020.

68. Y. T. Prasetyo, “Factors Affecting Gross Manual Dexterity: A Structural Equation Modeling Approach,” 2020 IEEE 7th International Conference on Industrial Engineering and Applications (ICIEA), 2020.

69. Y. T. Prasetyo and F. C. Veroya, “An Application of Overall Equipment Effectiveness (OEE) for Minimizing the Bottleneck Process in Semiconductor Industry,” 2020 IEEE 7th International Conference on Industrial Engineering and Applications (ICIEA), 2020.

70. Y. T. Prasetyo, “Standardizing Human Factors and Ergonomics Education for the Undergraduate Programs in Industrial Engineering: A Comparative Analysis between Indonesia, Philippines, and Taiwan,” 2020 IEEE 7th International Conference on Industrial Engineering and Applications (ICIEA), 2020.

71. Y. T. Prasetyo and A. T. Marquez, “Determinants of Customer Satisfaction with Metals Industry Research and Development Center (MIRDC) Analysis and Testing Services: A Structural Equation Modeling Approach,” 2020 The 4th International Conference on Business and Information Management, 2020.

72. Y. T. Prasetyo, “Factors Affecting Fine Dexterity,” Proceedings of the 2020 2nd International Conference on Management Science and Industrial Engineering, 2020.

73. Y. T. Prasetyo, “Assessing Indonesian Military Camouflage using Camouflage Similarity Index (CSI) Algorithm,” Proceedings of the 2020 2nd International Conference on Management Science and Industrial Engineering, 2020.

74. Y. T. Prasetyo, R. V. L. Cortes, F. S. Bautista, K. C. E. Piguing, A. J. A. Bermudez and C. N. Monteiro, "The Effect of Gender, Hand Anthropometry, Hand Dominance, and High School Grade on Hand Grip Strength in Filipino Teenagers Aged 15-18: A Structural Equation Modeling Approach," 2020 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2020.

75. T. Chuenyindee and Y. T. Prasetyo, “Roller Chains Quality Enhancement using Six Sigma and Failure Mode and Effects Analysis (FMEA),” Proceedings of the 2020 2nd International Conference on Management Science and Industrial Engineering, 2020.

76. Y. T. Prasetyo, “Utilization of Color Similarity Index for Evaluating Existing Military Camouflage Designs,” Proceedings of the International Conference on Industrial and Operations Management, 2020.

77. Y. T. Prasetyo, “A Comparative Assessment of Human Factors and Ergonomics Courses for Industrial Engineering in the Philippines,” Proceedings of the International Conference on Industrial and Operations Management, 2020.

78. Y. T. Prasetyo, “Occupational Fatality, Injury, Illness, and Work-related Abuses of Indonesian Immigrant Workers in Taiwan 2013-2014,” Proceedings of the International Conference on Industrial and Operations Management, 2020.

79. Y. T. Prasetyo and B. Tabares, "A Simulation-based Method for Predicting the Time-varying Passenger Demand at Metro Rail Transit Line 3 Using Monte Carlo Simulation," 2020 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2020.

80. R. Kishimoto and Y. T. Prasetyo, “Ergonomic assessment of personal protective equipment for COVID-19 in the Philippines,” 2020 IEEE 7th International Conference on Engineering Technologies and Applied Sciences (ICETAS), 2020.

81. M. M. L. Cahigas and Y. T. Prasetyo, “Kansei Engineering-based Model and Online Content Assessment in Evaluating Service Design of Lazada Express,” 2020 The 6th International Conference on Industrial and Business Engineering (ICIBE), 2020.

82. J. P. Ramos and Y. T. Prasetyo, “The Impact of Work-Home Arrangement on the Productivity of Employees during COVID-19 Pandemic in the Philippines: A Structural Equation Modelling Approach,” 2020 The 6th International Conference on Industrial and Business Engineering (ICIBE), 2020.

83. J. R. O. R. Balinado and Y. T. Prasetyo, “The Impact of 5S Lean Tool to Service Operation: A Case Study in Toyota Dasmarinas-Cavite Service Operations,” 2020 The 6th International Conference on Industrial and Business Engineering (ICIBE), 2020.

84. J. V. B. Jr and Y. T. Prasetyo, “The Impact of Material Management Plan on Delivering Offshore Construction Projects in Singapore,” 2020 The 6th International Conference on Industrial and Business Engineering (ICIBE), 2020.

85. D. D. Salazar and Y. T. Prasetyo, “Analysis of Worker's Posture in Wafer Manufacturing Industry,” 2020 The 6th International Conference on Industrial and Business Engineering (ICIBE), 2020.

86. Y. T. Prasetyo, R. Widyaningrum, and C. J. Lin, “Eye Gaze Accuracy in the Projection-based Stereoscopic Display as a Function of Number of Fixation, Eye Movement Time, and Parallax,” 2019 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2019.

87. Y. T. Prasetyo, “Evaluating Existing China Military Camouflage Designs using Camouflage Similarity Index (CSI),” Proceedings of the 2019 5th International Conference on Industrial and Business Engineering - ICIBE 2019, 2019.

88. M. E. S. Torres, Y. T. Prasetyo, R. A. C. Robielos, C. V. Y. Domingo, and M. C. Morada, “The Effect of Nutrition Labelling on Purchasing Decisions,” Proceedings of the 2019 5th International Conference on Industrial and Business Engineering - ICIBE 2019, 2019.

89. J. E. F. Martinez, Y. T. Prasetyo, R. A. C. Robielos, M. M. Panopio, A. A. C. Urlanda, and K. A. C. Topacio-Manalaysay, “The Usability of Metropolitan Manila Development Authority (MMDA) Mobile Traffic Navigator as Perceived by Users in Quezon City and Mandaluyong City, Philippines,” Proceedings of the 2019 5th International Conference on Industrial and Business Engineering - ICIBE 2019, 2019.

90. Y. T. Prasetyo, “Consumer Preference Analysis on Mobile Service Providers: A Case Study of Foreign Students in Taiwan,” 2019 IEEE 6th International Conference on Engineering Technologies and Applied Sciences (ICETAS), 2019.

得獎事跡

1. The Cardinal Excellence Award 2021 – Research Excellent Award (Scopus H-Index 16), in 2022

2. The Cardinal Excellence Award 2021 – Research Excellent Award (Scopus H-Index 9), in 2021

3. Best paper presentation award in 2020 IEEE 8th International Conference on Frontiers of Industrial Engineering (ICFIE), in 2021.

4. Best paper presentation award in 2020 IEEE 7th International Conference on Frontiers of Industrial Engineering (ICFIE), in 2020.

5. Best paper presentation award in 2020 6th International Conference on Industrial and Business Engineering (ICIBE), in 2020.

6. Best paper presentation award in 7th IEEE International Conference on Industrial Engineering and Applications (ICIEA), in 2020.

7. Best paper presentation award in The Joint Conference of 2nd International Conference on Industrial and System Engineering (IConISE) & 7th Annual Conference on Industrial and System Engineering (ACISE), in 2020

8. The Cardinal Excellence Award 2020 – Research Excellent Award (H-Index 4), in 2020

9. Best paper presentation award in 1st International Conference on Engineering and Management in Industrial System (ICOEMIS), in 2019.

10. Selected as the Indonesian Representative in Asian Council of Ergonomics & Design (ACED) Annual Meeting, in 2019 (Taipei, Taiwan)

11. NTUST Outstanding Youth 2015

12. NTUST School of Management Outstanding Youth 2015